%20Large.png){kind=small}
Training Center Information
Technical Training Schedule 2024
Guardian Fueling Technologies is pleased to present the 2024 Training Schedule. All training courses are held at our state-of-the-art facilities in Sanford, Florida and Kernersville, North Carolina.
Inside this document you will find registration and class preparation instructions, along with course descriptions and prerequisite requirements.
Classes are filled on a “first come, first served” basis. For course availability you may contact the registrar by e-mail: [email protected]
For questions concerning classes, please call (407) 321-0130 #O
DISCOUNTS
Please ask about our discounts for multiple students attending the same class at the same time. On-site and remote training programs are also available.
IMPORTANT
Gilbarco Veeder-Root’s Wise-LMS (Learning Management Suite) no longer exists. Wise-LMS has been replaced with Saba-LMS. Any Gilbarco, Veeder-Root, Gasboy and Red Jacket related Certification & Recertification courses will be handled through Saba whether it is a Web-Based or Instructor-Led.
Link to Saba: gilbarco.sabacloud.com
There are 2 Saba User Training links:
Veeder-Root Course
Level 1 Installation
Note: It is the responsibility of the companies admin/service manager to register and pay for their technicians for access into the API Safety Course and Level-1 thru Saba website.
The Home Study Course can be purchased thru Gilbarco Veeder-Root’s new training website called SABA. If you already have a profile created within Saba, simply go to https://gilbarco.sabacloud.com and sign in or if you do not have a profile created in Saba, please sign up for one.
If you have any Saba-related questions, please contact the GVR Technical Training Department at [email protected] or 336-547-5743.
ATG Certification Start-Up and Service
4 days (Including TLS-350, TLS-450, TLS-450PLUS & TLS4i/c) = $1,900.00
Subjects Covered in This Class are Listed Below:
Safety
Startup and Service Procedures
Installation Review
Diagnostic Troubleshooting
Automatic Tank Gauge Operation
Tank Testing
Hands-On Programming
Business Inventory Reconciliation (BIR)
Software Capabilities
MAG Probe & Sensor Installation, Operation, and Troubleshooting
Electronic Line Leak Detection includes PLLD and WPLLD
Veeder-Root ATG Certification Course 2024 Schedule:
This course is available on an as needed basis. Contact Guardian Training Center to learn more.
Prerequisite: Successful completion of the API Safety Course and Level 1 Home Study Course will make you eligible to attend our instructor-led ATG Veeder-Root class.
Subjects Covered in This Class are Listed Below:
Prerequisite: This class is required 24 months after successful completion of the ATG Certification course, for re-certification purposes. Contact [email protected] to complete this course.
Gilbarco Dispensing Course
Dispensing Systems Course
5.5 Day Hands-On= $2,900.00
Prerequisite: Completion of Saba web based Dispensing Systems Pre-Course and API Safety Course.
Note: It is the responsibility of the companies Admin/Service Manager to register their technicians into the API Safety and Dispensing Pre-Course ($350.00) thru Saba web-site. The API Safety Course is $70.00. The API Work Safe Contractor Course can be found at: apilearning.org
Purchases can be made through Gilbarco Veeder-Root’s new Training Web-Site called SABA. Simply go to https://gilbarco.sabacloud.com and Sign-In if you already have a profile created within Saba or Sign-up if you do not have a profile created in Saba.
Subjects in This Class Include the Following:
Web Based-Training
Payment Security for Dispensers
Meters
Laptop Programming and Event log training
Filters, Strainers, and Valves
Start-up and Service Dispenser Programming
Troubleshooting
Pumping Units
DEF & Ultra High
Lon and Node operation
Fixed and Programmable Blenders
Encore 700 Pumpside Electronics & Flexpay IV Crind Electronics & Programming
Encore 700 Flexpay II Crind Electronics & Programming
Component and Board Functions
Applause Media, Flex Connect V2
Gilbarco Dispensing Systems Class 2024 Schedule:
Monday, 7/8/24 - Friday, 7/12/24 (5 Days)-Kernersville, NC
Monday, 8/12/24 - Friday, 8/16/24 (5 Days)-Kernersville, NC
Monday, 8/19/24 - Friday, 8/23/24 (5 Days)-Sanford, FLA
Monday, 9/19/24 - Friday, 9/13/24 (5 Days)-Sanford, FLA
Prerequisite: Completion of web based portion of the Dispensing Systems course. This price includes LMS (web based portion) fees and literature used during the class. All students must have Gilbarco Extranet Access and plan on homework nightly.
Gasboy Islander Prime Class
Passport Point of Sale System
3-4 Day Hands-On = $2300.00
Prerequisite: Safety or POST SAFETY Certification (Status=Acquired) - Gasboy Atlas Dispenser - Gasboy Islander Prime Pre-Course
Note: This course covers the Gasboy Islander Prime system. The training covers the installation, and overview of the system, software installation and updates, and details on enhancements from previous generations
Islander Prime Class Details:
Gasboy Islander Prime Instructor-Led Exam 3-Attempts with a Minimum Score of 85%
Prime Introduction
OrCU Software
Setup Wizard
OrPay 1000
12 Port Commverter
Pumping Units
User Manual
Fleet Head Office
FiPay
Parts Manual
EKOS
Commissioning
Fuel Point
Gasboy Islander Prime Classes 2024 Schedule:
Monday, 8/5/24 - Friday, 8/9/24 (5-Days)-Sanford, FLA
Monday, 9/9/24 - Friday, 9/13/24 (5-Days)-Sanford, FLA
Prerequisite: Completion of web based portion of the Dispensing Systems course. This price includes LMS (web based portion) fees and literature used during the class. All students must have Gilbarco Extranet Access and plan on homework nightly.
All Classes Have Laptop Requirements and They are Listed Below
Veeder-Root Classes:
Windows 10 & 11
Serial port or serial port replicator for RS232 communication. Crossover cable and Wired Ethernet port for TCP/IP communication (RJ45 port).
High Speed internet access. Laptops & Serial port replicators must be tested before class! HyperTerminal or a terminal emulation program is required.
Passport:
Windows 10 & 11
If you have HyperTerminal, (or a terminal emulation program for Serial Communications). Internet Explorer 11 works best. Wired Ethernet port for TCP/IP communication.
High Speed internet access. Java Application (Can be downloaded from https://Java.com). Laptops & Serial port replicators must be tested before class.
Dispensing Systems:
Windows 10 & 11
Serial port or serial port replicator for connection to dispensers.
High Speed internet access (either wired or wireless). Laptops & Serial port replicators must be tested before class.
Registration:
Technicians employed by Gilbarco/Veeder-Root, Authorized Service Contractors (ASCs), and Customer Specified Contractors, (CSCs), are eligible to attend. Other technicians may attend with District Sales Manager and Area Service Manager Approval. Call if you are not sure of your status.
How to Register:
-
Complete registration form >Training Registration
-
Ensure prerequisites are fulfilled.
-
Include tuition.
-
Mail to the address listed on the Registration Form.
Course Availability:
If a course is full or postponed, you will be contacted by the Training Department. We need a minimum of 3 students to present a class.
Tuition:
Payment must be included with the registration form. Fax or phone registration will not be accepted. (E-mail registrations are accepted).
-
Make Checks Payable to: Guardian Fueling Technologies
-
Send to: Guardian Technologies
-
Training Department 351 Central Park Drive Sanford, Fl. 32771
Cancellation Policy:
The Training Department must be notified, and will notify companies of students, at least two weeks in advance of the course to receive a refund of tuition and cannot be held responsible for penalties incurred by airline ticket cancellation or schedule changes.
Class Preparation:
Daily Schedule:
Classes begin at 7:30 a.m. each day and ends upon completion of the class goals for the day, typically between 5:00-6:00 p.m. There are no classes on Saturday or Sunday. Homework will be assigned daily and it will include both written and reading assignments. Be prepared for on-line homework after class!
What to Bring:
Small hand tools (pliers, screwdrivers & nutdrivers or small socket set) and a volt/ohm meter will be required. Students need to be prepared to carry home several large technical manuals and notebooks. Lock out/ Tag out kits and Static Straps are required for Veeder- Root and Gilbarco classes!!!
Recommended Attire:
We require bussiness casual attire. Please note you are required to wear long pants. No shorts, flip-flops or sandals, or t-shirts are permitted.
Hotel Reservations:
Students attending our classes must make their own hotel reservations. Call at least 2 weeks prior to checking in. We have excellent rates with the Springhill Suites Sanford near the Training Center. There are also other hotels in the area. The Springhill Suites phone number is (407) 995-1000.
Expenses:
You are responsible for all expenses including meals, transportation and lodging.